windows

ALUPLAST Intertec 85
podgląd

Intertec 85 are windows constructed for the Aluplast system with the installation depth of 85 mm. The said installation depth, 7-chamber frame profile and 6-chamber sash profile, potential glazing up to the width of 48 mm as well as a unique middle gasket ensure perfect thermal insulation of the profile.

Characteristics:

  • - The installation depth of 85 mm
  • - 7-chamber frame profile and 6-chamber sash profile - Intertec 85 MD
  • - 6-chamber frame profile and 6-chamber sash profile - Intertec 85 AD
  • - The possibility of using the glazing with the width of 24 - 48 mm
  • - A unique middle gasket improves the protection from wind, rain and acoustic insulation
  • - Narrow combination of frame and sash equal to 115 mm
  • - Broad colour range

Technical data:
Uf=1,0 W/m2 K
Ug=0,5 W/m2 (with warm edge-spacers)
Uw= 0,74 W/m2 K (for the reference window 1230 mm x 1480 mm)

The installation depth of 85 mm, 6-chamber profile, potential glazing up to the width of 48 mm as well as a unique middle gasket ensure perfect thermal insulation of the profile. The introduction of an additional middle gasket, which seals up the window construction on its circumference, results in the creation of the so-called dry chamber where the fitting system operates. Separating the mechanism from the external conditions contributes significantly to lengthening their operating time.
The low profile combination with the width of 115 mm makes it possible to enlarge the glass surface and, as a result, lets more light into the room.


Intertec 85 with the middle gasket (MD)

dedicated for:


  • one-sash and two-sash windows with the standard mullion
  • terraces without threshold
  • sliding systems with the size not greater than 1200 mm x 2400 mm


Intertec 85 without the middle gasket (AD)

dedicated for:

  • windows requiring the wide mullion
  • terraces with threshold
  • constructions whose size requires the wide sash – either with threshold or without it
  • sliding systems constructed with the wide sash

All the constructions, both doors and windows, using the terrace sash can be produced only in the AD variant, opened to inside.

The external doors, both opened to inside and to outside, are produced in the AD variant, i.e. without the middle gasket.

CONTACT
+48(32) 456-22-00